What Youve Heard

The rapid development of automobile industry and the level of people's consumption is growing, privately-owned cars had to make a reality. Today, more and more cars into the homes of ordinary people. According to estimates, every 1 yuan 0.65 per car consumption will drive the car after-sales service. In addition, along with rising consumption cars, consumer knowledge and understanding of the conservation of the car also undergone a great change, "one third of by repair, seven by raising" the idea to raise on behalf of the repair has been widely accepted. This means that professional, standard and high-quality automotive service industry in the present and the future of the automotive consumer market development potential. Potential requirements Automotive Maintenance Subsequent deepening of the industry, constantly changing. Therefore, in the next 2,3 years, the automotive maintenance industry will reshuffle the cards, showing changes.

Market in standard industry innovation policy

In China, with the surge in car ownership, the market needed more than the number of wide distribution, quality parts support, technical level of high diagnostic accuracy, advanced equipment, maintenance, fast professional service companies of new conservation to adapt to growing changes in the automobile market. According to data from the State Information Center: Since 1996, China's total car sales to increase 15% per year, of which the annual demand for cars will span 100? 2 million level. With the strong development of industrial economy, people live and work in the future will greatly accelerate the pace car will inevitably become a popular means of transport, and car maintenance service will also become a popular component of daily consumption. Clearly, the current vehicle maintenance company obviously can not fully meet this need.

Related Reading : Ma Songhai: auto additives industry "bidding model" of the founder

The late 80s early 90s, China has been a used car off the climax of additives. Today, the National Development and Reform Commission announced that in view of the recent international oil prices continue to rise, according to a revamped oil price formation mechanism, decided at 0:00 on the on March 25 from the gasoline and diesel prices were increased by 290 yuan per ton and 180 yuan . Plus the car to "keep seven, third revision" concept has been recognized more and more vehicle owners, in this case, the auto industry or Qiangzai additive upsurge was set off ... ... Detailed Throughout today's automotive maintenance

market, there are two disadvantages: First, although the various forms of maintenance, beauty shop after another, everywhere, but the lack of unified management, the market is not standardized. Inside Story, violations occur. In the absence of uniform standards to guide policy, market confusion can be imagined. Therefore, the industry needed government introduced the policy of the relevant standards for business practices which laws are followed, to make feasible; Secondly, a number of conservation of internal management are not standardized, there is no guarantee product quality, low-technology, poor product structure level , selling products and less comprehensive store management is poor, staff expertise and service consciousness, making it difficult to provide quality services to consumers. Therefore, companies need to train well in internal structure and conservation, to innovation, and strive to excel in a number of brands to create their own piece of heaven and earth, bring quality services for consumers as well as achievements in themselves.

Preventive maintenance and routine primary care both DIY

1991 Gulf War, a little-known secret weapon caused the shock of national military, he is the RCM preventive maintenance theory, the United States rely on the theory of saving one third of the military today, based on reliable of the center of the RCM theory has been widely used in military, automotive, electrical and other fields. Automotive preventive maintenance is to protect the vehicle performance as the center, to reduce the cost of vehicle integrated restore and maintain the best features of the goal of a new maintenance system. He not only includes regular maintenance of all content, even with routine maintenance by the lack of data, as appropriate, maintenance and testing, then the problem can be resolved within the incubation period is out, take precautions to avoid the problems caused by everything from scratch when the excessive economic losses.

In many western countries, many car owners like yourself beauty, DOITYOURSELF, referred to as DIY. In fact, the daily beauty care cars is not as you imagined it to be mysterious. Commonly used in daily care of the cleaning agent, Abrasive , Conservation Polish To protect the agent. Some products are both more effects to the basic daily care to complete the car. The success of the 2008 Olympic Games, held in the Olympic Games not only for consumers in some car DIY products, kept alive the "primary care DIY" concept quietly into the hearts of consumers. In addition, in the context of economic crisis, consumers have Wujin their pocketbook. But the savings go to save the car, or want to use the car or to keep, and since the consumer is not willing to go outside, it-yourself DIY has become a good alternative. Moreover, their hands will bring many unexpected fun, dress up care allows car owners, while also taking a step forward with the car, heart closer. Thus, in the days, even crisis, the cold retreat, the owner is not willing to give up their car "close contact" time of the DIY.

DIY beauty treatments on the car for a week, exclusive use Car wash Cleaning the first time, in order to timely remove surface stains?? This will not damage the original Wax . In addition, each month, do a whole car beauty care, including washing, waxing, polishing, cleaning the wheels, clean interior and parts. Of course, DIY is not a panacea, consumers need to be under the vehicle condition, due to the professional beauty shop car sent to the implementation of professional nursing.

The Indian two wheeler market is increasingly becoming a price warfield. Everyone and their competitor wants to win the title of the 'World's cheapest bike' and the cutsomer has become the King, actually more like God!

But I often wonder if this price based competition is good for the health of the industry. Isn't everyone eating their own margins in the quest for greater marketshare and farther market expansion? And where does this leave smaller players like LML (going through some very tough times as of now), Kinetic (good scooters, questionable field network, trying hard in motorcycles) and even Yamaha and TVS? I am not even talking of Hero Motors.

A big guy like Hero Honda or Bajaj Auto can arm twist suppliers to deliver parts cheaper, which I am sure the suppliers won't mind doing considering the volumes that these two guys offer. Both the Munjal and Bajaj families are also typical in the way they promote companies run by their brothers, cousins, in-laws etc. etc. So Bajaj Auto can always ask for cheaper rates from a Varroc or Auragabad Electricals while Hero Honda can do the same with MAC or Munjal Showa or Omax Auto. But what happens to LML (still makes a lot of its components, very archaic), Kinetic (mostly independent suppliers), TVS (Sundram Group suppliers, who anyways act independenlt, very professional but is it the best way forward?), Yamaha (independent suppliers) or a new entrant like Suzuki (they will buy components from anyone except a Munjal family or a Sundram company)? Without volumes, one is not in a position to get the best prices.

Without the best component prices, the price of the final product goes up. But then you have to fight Bajaj Auto. So you reduce the selling price of the bike. Then your margins nosedive!

This seems to be a vicious circle to me : Low volumes > High component prices > High final price > Still lower volumes > Low profitability or another way forward may be Low volumes > High component prices > Low final prices > Compromise on margins > Low profitability. Still another way forward may be like this Low volumes > Low component prices (I compromise on component quality) > Low final product price > High volumes > Low dependability > Low customer satisfaction > Low volumes > Low profitability. Thus the fat gets fatter while the small gets smaller and may eventually get wiped out.

The only way out seems to be technical innovation which can give a low volumes company advantage over a high volume one. Unfortunately low volumes low profitability also means that you don't have major money to invest in R&D. Or in some cases, like TVS, where R&D does get a priority, it is mostly copied very quickly by rivals as most of the R&D is supplier driven. So a Centra loses its technical advantage to a CT 100 very quickly. After all the battle field is of 100cc bikes, not battle tanks.

The other way out of this vicious circle is by concentrating on niches. Indian bike manufacturers till now have focussed on street commuters only. A high percentage of the market is shifting to a low margin, high volume game and smaller manufacturers need to get out of this rut to survive. So Kinetic should not be doing a Boss and TVS should not be putting its energies into a Star or even a Centra. Small companies should be focussing on 150cc + niches and experiment with new bodystyles. Performance and quality should be the marketing weapons rather than price.

This very topic primarily focuses on the industrial cleaning aspect which is considered very important by maintenance departments. Today you need to keep all your industrial machines and applications in perfect order to maximize the production capacity and also reducing the accidents occurring due to poor maintenance. In order to keep your equipment and machines clean traditional cleaning methods such as sand blasting, solvents and high pressure water blasting have been used. But all these methods have become a thing of the past since modern fast paced companies need quicker and more efficient ways to keep their equipment clean. A revolutionary new cleaning process called Dry Ice Blasting uses pellets of CO2 (dry ice). It is primarily used for a variety of applications to reduce downtime and waste generation. The pellets sublimate (convert directly from a solid blast pellet to a vapor CO2) leaving no residue.

So what exactly is Dry Ice Blasting?

It is a process in which dry ice particles are propelled to supersonic speed impacting and thus breaking free the debris on a surface. The particles are accelerated by compressed air just as with other blasting systems. The micro-thermal shock (caused by the dry ice temperature of -79º C), the kinetic energy of dry ice pellets and the air pressure break the bond between the coating and the substrate. It pops off the coating from inside out and the air stream removes it from the surface. Industries can utilize the CO2 blasting method through equipment that fires the pellets through a blasting gun. It is called instantaneous sublimation. Upon impact the dry ice sublimates (vaporizes). When the dry ice impacts the surface being cleaned it emits ambient heat that causes the separation of dirt particles from the contaminated area and thus making the surface clean. The dry ice blasting is very advantageous as compared to some traditional methods. Some of the issues that traditional cleaning systems face are listed below:

• Disassembly/reassembly; drying time required.

• Solvents become a secondary contaminant and must be disposed of.

• Intensive hand scrubbing; lengthy cleanings and follow-up cleaning-up can be lengthy.

• Poor to average results.

• Grit abrasions; grit contamination; movement of equipment to and from cleaning area

• Health and environmental threats from solvents; water-based cleaning pose hazards around electrical equipment.

• Cleaning agent becomes additional hazardous waste; expensive solvents; additional labor and personal protective equipment is required.

Whereas Dry Ice Blasting has the following advantages:

• Equipment can be cleaned in place; dry process; can clean while equipment is hot with no down-time.

• No additional contaminant; dry ice sublimates when contacting the targeted surface so only clean-up of the removed contaminant is necessary.

• Dramatically reduced labor - often completed in half the time or better.

• No equipment damage; preventive maintenance very realistic as labor hours are significantly less.

• Standard safety precautions; dry process - safe around electrical equipment

• Minimal - cost of dry ice.

The Dry Ice Blasting process is accentuated with the environmental benefits because companies today want to minimize their industrial waste. When all benefits of Dry Ice Blasting are added up Dry Ice Blasting is the perfect solution to reduce environmental waste, production downtime and plant maintenance concerns.

Some of the industries where Dry Ice Blasting is widely being used are:

Aerospace

Historical Restoration

Automotive

Mold Remediation

Contract Cleaning

Packaging

Electrical

Plastics

Fire Restoration

Power Generation

Food and Beverage

Printing

Foundry

Rubber

General Maintenance

Wood

The process is used in almost any type of industry that has equipment which regularly needs to be cleaned. It is safe to be used where there are smoke particles and residues of mold. Dry Ice Blasting for ink presses is a rapidly sought-after process for the printing industry. Build-up of ink causes production quality and safety concerns. Dry Ice Blasting ink presses are beneficial because it takes away the need for manual labor, solvents and down-time. It has certainly been a revolution for not only the printing industry but also almost all industries that use equipment. Dry Ice Blasting is the tried and true method against obsolete cleaning technologies and is gaining in popularity with plant maintenance crews.

Hand car, many owners are not installed for the alarm installed but worried the market is also a large selection of anti-theft device makes a loss. According to foreign media reports, the highly skilled car thief can break in half an hour the most stringent high-end car security systems. Therefore, how to select the anti-theft device really is a science.

Auxiliary anti-theft device simple mechanical lock

Status: mechanical lock is the most common application of the first Car alarm Measures are mainly used in conjunction with other security measures. Mechanical anti-theft lock key role in the operation of vehicles from the restrictions, it is difficult to resist crowbar, hacksaw, scissors and other tools of the destruction of steel, but they can delay the car thieves had committed crimes is a fact.

Analysis: Steering wheel lock Many car owners are used, no additional installation; gears lock is usually installed in the center console, the lock body and body connection, through the lock ring limits the movement of shift handle; there is a transmission lock, card lock built directly made shift lever, but the price of almost 1000 yuan, and the shift lever to replace the original, not many users.

Tip: mechanical lock, was undoubtedly the most widely used steering wheel locks, door locks, gears lock and oil, prices ranging from 100 yuan to 1,500 yuan. Main purpose is to deter those who steal. New car buying a baseball bat-type steering wheel lock, can increase security, but also play a role in self-defense.

Electronic Security applications in general but there are still loopholes

Status: electronic anti-theft lock is the most widely used anti-theft lock, one of the main features include keyless entry, searching cars and illegal open alarm, there are some other brands of products to increase functionality, such as using electronic remote control the completion of engine startup, flameout.

Analysis: There are three types of electronic security devices. In the control-type anti-theft more practical, with a special locking nut alarm can handle general car thieves; One-way Alarm Lock with remote control car functions, will experience abnormal vibration alarm; Two-way Alarm Has been improved to display vehicles in the state of the remote control, more intuitive.

Tip: electronic anti-theft system is fatal to electronic code and remote control operated. When the owners when the doors with the remote switch, hidden in a nearby car thieves can steal the signal with the receiver and decoder, the owner should be used with mechanical anti-theft device.

Chip digital anti-theft car alarm mainstream of modern

Status: Chip digital anti-theft car alarm device is mainstream, the majority of vehicles are used in high-end security approach such as the Original. Current chip-type anti-theft has been developed to the fourth generation, with special diagnostic feature, read the key confidential information, access to historical information of the anti-theft system.

Analysis: Chip is a basic principle of the digital anti-theft devices to lock the car motors, circuits and circuit, in the absence of a key chip can not start under the vehicle. Fourth-generation electronic anti-theft system's unique radio frequency identification technology (RFID) can guarantee that in any case the system can correctly identify the driver, the driver close to or away from the vehicle can also be automatic recognition of their status.

Note: this system, the password re-rate is very low, use your password access to the car key to unlock the password lock to eliminate the drawbacks of being scanned. At present, many imported luxury cars, and cars have been equipped with domestic joint-venture factory-chip brand anti-theft system.

The direction of future development of network security

Status: Network security is achieved through the network door switches, engine start, stop and auto operation, also enables remote vehicle speed, vehicle location and reporting functions. Mainly rely on network security GPS Global Positioning System to achieve its remote control vehicle functions in the past, and crime prevention measures can not match the.

Analysis: network security benefit from the satellite monitoring center of the vehicle's 24-hour, high-precision monitoring services, the system installed in the command center by the central control system, installed in vehicles as well as GSM mobile GPS terminals Communicate Network composed of a moving target by satellite to calculate the longitude, latitude, speed, direction and GPS communications with traditional programs can not match advantage.

Tip: The system is expensive, currently only applies to a few high-end models, the car must have a GPS Navigation System, the installation price of more than 2000 yuan per month to pay the service charge to pay a fee, yet to achieve universal access.

Last wave after wave Automotive Industry The tide of mergers and acquisitions, "Beijing School" generous impressive. Rebuilding the important pillar industry in Beijing's policy of support, BAIC, Jingxi heavy industry and other businesses frequently shot, seemingly random were in formations, actually close the mouths points clear in the capital Car Acupuncture points on the key chain.

With the support of the relocation of Shougang Beijing Economic and Half the Sky to Hebei, coupled to the Electronic Building industry is not satisfied, go all out to become bigger and stronger automotive industry has become in recent years, the Beijing Municipal Government's strategic intentions.

Last November, the Beijing Municipal Committee and Beijing Municipal Development and Reform Commission by letter jointly issued by five major industrial revitalization program, the first of which is the automotive industry. In the "auto industry restructuring and revitalization of the implementation of the program," mentioned that from 2009 to 2011, the Beijing Automotive Industry output growth rate of more than 15% annually, and strive to reach 20%; 2011, the output value from 1.6 to 1.8 trillion yuan, industrial added value accounted for 10% of the city's industrial, accounting for 2.5% of the city's total economic output.

From Beijing Hyundai chairman of the board as to the Beijing Auto Group Chairman, Yi Xu, and the integration of the BAI, both are a manifestation of the will of the Beijing Municipal Government. The fastest way to bigger and Beiqi mergers, acquisitions, the idea received strong support for the Beijing Municipal Government.

To support the development of automobile industry in Beijing issued regulations, in conformity with national auto industry policy and industrial development planning projects in Beijing can apply for funds to support industrial development in Beijing to support the way of discount, including loans, investment shares, grants so.

The outside, whether from overseas, Opel, Saab, or domestic Fujian Daimler, the Beijing Automotive Group may seem impatient, "beggars," but in fact Yi Xu and hearts, it has a very clear M & A map.

The acquisition strategy, foreign car brand enterprises from the outset, the focus is not Beiqi acquisition. In the acquisition mode, the BAIC and the overall loss-making enterprises did not eat, but minimizing the assumption of debt, employees, international management, cultural integration and a series of uncontrollable risk.

But to help Beiqi improve Own brand Core technology assets, Beiqi then accept whatever. "Beiqi overseas M & A objectives are very clear, take the technology-based mergers and acquisitions and achieve its leaps and bounds." BAIC general manager Wang Tai always accept the "First Financial Daily" reporters interview frankly.

Acquisition of Saab's platform technology, the current Beijing Automotive is losing no time on the purchased technology absorption. To this end, Beijing Automotive has set up a Beijing Automotive Research Institute, Division passenger cars, Powertrain Division, Beijing New Energy Motor Company, a passenger car development and commercial operation of the complete system has been built incubation facilities for technology to improve the hardware.

2 billion would be successful in the bag Saab technology, the "big Beiqi" sight. Beijing Auto Group achieved a breakthrough last year, 1.2 million production, the output value 110 billion yuan, according to Xu and Yi planning, Beiqi plans to 2 million sales by 2011, output value of 240 billion yuan. BAI will continue to improve the current R & D, vehicles, spare parts, asset management and trading the five major platforms, trying to achieve a "big Beiqi" strategic layout.

"North Group" on the car's generous corporate acquisition reflects everywhere. However, there was no shortage of atmospheric fine.

Few years ago, on how to develop the automobile industry, the Beijing municipal government is not particular clear idea of the national "car industry restructuring and revitalization plan," Following the launch of the Beijing auto industry is positioned to become the capital of high-end industries and modern manufacturing economy so important pillar industry, building high-end components park, park and other high-end automotive electronics industrial park had been planned.

Last November, from 51% of the West Beijing Shougang Holding acquire U.S. Delphi Heavy damping brake department, among the automobile chassis parts to high-end market is the manifestation of the idea.

Research Report on Chinese Passenger Vehicle Industry
 
 In China, the definition of the passenger Vehicle refers to the vehicles used to carry the passengers and the personal luggage or the temporary articles and with the seats no more than 9 included the driver’s seat in design and technology. The passenger Vehicle covers the cars, mini passenger cars and the light passenger cars with less than 9 seats. The passenger Vehicle can be subdivided into the basic passenger vehicle, multi-purpose vehicles, sports utility vehicle, special passenger vehicle and the cross passenger vehicles. ( http://www.bharatbook.com/Market-Research-Reports/Research-Report-on-Chinese-Passenger-Vehicle-Industry.html )
 
 In 2008, the sales of Chinese passenger Vehicle totaled 6.7556 million, YOY up by 7.27% with the growth speed down by 14.41% over the previous year. Among the major types of the passenger Vehicle, the growth speed of the cross passenger vehicles was increased slightly, but the growth speed of the basic passenger cars and the sports utility vehicles was dropped sharply. The growth speed of the multi-purpose vehicles cut down for the first time since 2005, whose performance was depression. In 2008, the yields and sales of Chinese basic mode passenger cars were 5.0373 million and 5.0469 million respectively, up by 5.00% and 6.78% respectively and the growth speed cutting down sharply compared with 2007. The yields and sales of the multi-purpose vans were 191,700 and 197,400 respectively, cutting down by 14.68% and 12.56% respectively compared with 2007. The yields and the sales of the sports utility vehicles were increased by 24.41% and 25.28% to 448,000 and 447,700 respectively, with the growth speed declining by 26.80 and 24.81 percentage points over the previous year. The yields and sales of the cross passenger vehicles were 1.0607 million and 1.0636 million, up by 6.22% and 7.67% of the last year, with the growth speed holding the line over the previous year.
 
 In order to propel the development of Chinese Vehicle industry, Chinese government approved Adjustment and Revitalization Plan of Vehicle Industry in January, 2009 and officially issued in March, 2009, including: cutting down the purchase tax of passenger Vehicles; decreasing by 5% purchase tax of passenger Vehicles with emission below 1.6 liters; speeding up the renew and abandon of the old Vehicles; perfecting the credit loan systems for Vehicle consumption; standardizing and promoting the development of second-hand Vehicle market; supporting the mergers and acquisitions among Chinese Vehicle enterprises; spreading the usage of energy saving and new energy Vehicles and developing independent brand Vehicles etc. In recent years, there was great development space for Chinese Vehicles with low emission. It is predicted that by 2012 the passenger Vehicles with the emission less than 1.5 liters will account for over 40% market shares, the passenger Vehicles with the emission below 1.0 liter accounting for 15% market shares. The sales of new energy Vehicle will account for 5% of the total passenger Vehicle sales volumes.
 
 The concentration of Chinese Vehicle industry will be improved gradually. By mergers and acquisitions, China will form 2 to 3 large Vehicle enterprises with the yields and sales exceeding 2 million, 4 to 5 Vehicle enterprises with the yields and sales exceeding 1 million. The number of the Vehicle enterprises, accounting for more than 90% market shares of yield and production scales, will reduce from 14 at present to less than 10.
 
 In January, 2009, the sales of Chinese domestic Vehicles increased, exceeding America and becoming the biggest new Vehicle sale market in the world, which showed that Chinese passenger Vehicle market was not lack of purchase power, but the consumption confidence was restrained under the circumstances of the international financial crisis and the domestic economic depression. Once the external factors, such as a series of stimulation policies issued by the government, took effect, the sales of Chinese passenger Vehicle would keep a steady growth. This report mainly analyzes the present development situation of Chinese passenger Vehicle market and also involves the sub-sectors of Chinese passenger Vehicle market. Meanwhile, the operations of the domestic outstanding passenger Vehicle enterprises are introduced in this report. Chinese enterprises can find out some experiences and lessons and discover the potential investment opportunities. This report has valuable references to make a understanding of Chinese passenger Vehicle market about the present development, competition patterns, market direction and development trends and master the investment opportunities.
 
 More following information can be obtained in this report:
 - Productions of Chinese Passenger Vehicle Industry
 - Demands of Chinese Passenger Vehicle Market
 - Development Environments of Chinese Passenger Vehicle Industry
 - Imports and Exports of Chinese Passenger Vehicles
 - Influences of International Financial Crisis on Chinese Passenger Vehicle Industry
 - Influences of Adjustment and Revitalization Plan of Vehicle Industry on the Development of Chinese Passenger Vehicle Industry
 - Factors Affecting the Development of Chinese Passenger Vehicle Industry
 - Prediction on the Development Trends of Chinese Passenger Vehicle Industry
 
 Bharat Book Bureau
 Tel: +91 22 27578668
 Fax: +91 22 27579131
 Email: info@bharatbook.com
 Website: www.bharatbook.com
 Blog: http://bharatbookresearch.blogspot.com

Saying goes, "clothes make the man by saddle horse" appearance is something we judge the merits of the most visible elements. Cars especially, a glamorous car, if not famous, but also some bright spots; a further big the cars, if depressed, chaotic mess inside, it will not make people have a good impression. And let Car Qulity, clean and tidy, it should be like beauty, like beauty, need comprehensive care from outside to inside, to "show on the outside and Hui in China."

Car how to "beauty"? Warm water to flush out pollutants, water pollution bubble

To escape the sun's exposure, owners are willing to park in the shade of the trees, gum and bird droppings on a headache for vehicle owners.

Wall Yuen Hong 4S shop Technical director, said Yan Bin, gum and bird droppings to deal with the most important thing is to grasp the cleaning time, the earlier the treatment the more relaxed, as long as the normal cleaning can be removed. If time is too long, gum and bird droppings will harden, simply cleaning be difficult to clean, handle them very troublesome. Then rinse with warm water and dirt should be first, and then soaked with water until the dirt softened further after the deal to avoid paint damage.

Addition to gum and bird droppings, and the other enemy is the asphalt. In hot weather, heat to melt asphalt pavement, the wheels will be driven to splash Car body Top of difficult to remove after drying, but also to finish by the corrosion and discoloration, there may be more serious skin off.

Yan Bin told reporters, when dealing with asphalt, avoid direct with a knife and other sharp objects, scraping dirt, or improper use of organic solvents, sol-cleaning, the former lead paint scratches, which will result in more serious corrosion. The correct approach is to use the asphalt cleaner, thus more than ten dollars a bottle generally will be even cleaner sprayed asphalt surface, slightly over a period of time can be directly removed with a soft cloth, place can be more serious repeatedly sprayed clean, clean soon.

The usefulness of asphalt still a lot of cleaning agents, such as vehicle owners will participate in various activities in the body or glass paste the number or activity of some posters, the stickers also can damage paint handled properly. The correct way is to use hair dryer uniform baking stickers, and after exposing the part than baking, as long as the patient and operation, you can successfully remove the stickers. If you have already torn up the surface, the asphalt used in the resin coating on the cleaning agent, later wiping very good results can be achieved. Yan Bin reminded owners, spraying asphalt cleaning agent should try to avoid spraying the rubber surface, so as to avoid corrosion. How to disinfect

car? Remove smell always wash "sauna"

Temperature, humidity, dust, easy to make a sealed compartment to become a breeding ground for bacteria best. Automobile interiors carpet, seats, cushions, air-conditioning vent, trunk, etc., due to frequent contact with moist air or water stains, mildew easily breed bacteria, odor, not only affects the interior air environment, owner health is also threatened. Yet, the traditional Car wash Methods can not remove the bacteria left in the car, so regular disinfection is necessary inside. Jiugen the same person sauna can release fatigue, car also can use the "sauna" to disinfection.

Yan Bin told reporters, "sauna" is the core of steam, making cars, "sauna", the technician in the steam engine to add water, detergents, fragrances, the use of high-temperature exhaust steam to the leather seats, door interior, instrument panel, air-conditioning vent, carpet disinfect, eliminate hidden in cracks in the stubborn bacteria. The three combined with professional cleaning machine, steam engine, multi-functional sterilization machine (ozone, ultraviolet, infrared, negative ions) and other equipment, not only can effectively remove the car's cigarette smoke, greasy and other musty smell, also eliminated bacteria, mites breeding, and some of the leather surface protective layer due to acid damage suffered arising from fading, yellowing occurred. Is there another trick

sterilization? "Sun" can be sterilized

Addition to "high temperature sauna," the rise in recent years, the photocatalyst is also a good method of disinfection. Nano-titanium dioxide photocatalyst is mainly disinfection materials. The disinfection principle, the photocatalyst in the absorption of sunlight or ultraviolet light source in after the excitation energy in the UV oxidation reduction reaction, the formation of strong surface oxidation of free radicals, the air free of harmful substances and micro-organisms decompose into harmless carbon dioxide and water, so as to achieve air purification, sterilization, deodorization purposes.

The worldwide auto industry loves fossil fuel. It has been addicted to oil since the first Model T rolled off of the assembly line. The internal combustion energy thrives on fossil fuel - gasoline, diesel.

But there's a problem. The main suppliers of oil to feed the auto industry's addiction keeps raising the price, and the supplies of oil are being depleted. There IS a bottom; an end. The world will eventually run out of oil.

Of course, we can't put all of the world's oil consumption habit on the shoulders of just the automobile industry. If every automobile in the United States was a hybrid by the year 2025, we'd still be importing as much oil as we do today. We use a lot of oil, and we use it for all sorts of things.

The automobile industry is bearing the brunt of the responsibility and the industry IS responsible, but it isn't totally responsible. Every single one of us use oil every time we turn on a light, use our blow dryer, or open a can of soup.

But cars are a large part of the problem, and the truth is that the industry is experimenting with alternative energy sources to power automobiles - and they have been for a lot of years now. There are a lot of possibilities.

Fuel made from plants is an option. So far a method of extracting and delivering biofuel hasn't been perfected. Fuel cells are another possibility. The auto industry has been experimenting with fuel cells for more than 10 years. Fuel cells use hydrogen to generate electricity by creating a chemical reaction that releases energy that can be used to power a car or truck. The research is promising. The auto industry will kick the addiction to oil - not because it wants to but because it has no other choice.

For women to drive, there are a lot of prejudice, as long as the slope in front of the car sliding, male fellow city curl one's lip: "Oh! Zhenshi Ben ah! In front of that girl must be a woman driving in the car ... ... is this like, really slow dead, will not open, do not open, is really the traffic ... ... "As a female owner, upon hearing this kind of discourse is not very angry, very unwilling? In fact, in addition to F1 racing hands of any female figure, the daily lives of women better than men driving a little difference, as long as the master drive canon on the line.

Small details about major issues Many women often overlook the little details before driving, in fact, all these small details and Travel And safety are closely related, absolutely no negligence. First of all, depending on their height and leg length to adjust the seat high, low, before and after the distance, in order to achieve a perfect degree of comfort, which is not less than step occurs Accelerator Or Brake Horrendously. Some women prefer the seat adjusted too close, or put a cushion on Drive Seat to increase the height of the body almost to touch the steering wheel, this would have become very tense body, arms and legs bend too much flexibility will affect the control, while a narrow angle will become shorter.

Furthermore, do not forget to adjust the mirrors and around the central mirror. In general, women driving is most worrying is that, only to see the road ahead, but not distracting to "take care" to the three mirror. But you know the central rear view mirror allows the rear of the vehicle speed to maintain a safe distance from traffic; about mirrors in overtaking, changing lanes and parking when they play an important role. The number of accidents and shoes

Drive off the high heels are correct, wearing high heels, platform shoes or slippers drive will affect the pedal action and intensity. However, many women take off their high heels on the car and turning on the seat next to, in fact is very dangerous. Car downhill, the brake pedal shoe easily rolled beneath the brake pedal stuck, once encountered an emergency situation, do not go step on the brakes, sure to be an accident. Therefore, women drive the best to take off the high heels on the back row, although the small things that can be related to the safety of Egypt

Not only affect the traffic safety shoes, and now the common small-car accessories, cartoon toys and canned drinks, cell phones, etc., if you do not place the sound, once dropped to the driver's seat, the pedal may be rolled under the lead vehicle brake failure. Many women drivers like the many toys in the car hanging ornaments, car is lovely, and can be excessive if the pendant will affect the driver's attention, causing security problems.

Rear windshield in front of the platform do not put books, folders and other objects scattered rain. Although the light of these objects can be when the car is 50 km / h speed collision, the platform 3 to 5 kg weight of the object will be a force of 400 to 450 Newton hit the back seat passengers.

Slowly open may not be safe

We first proposed a concept: driving too slow, do not necessarily represent the safety. Because many women owners always think, "I carefully opened slowly, always safer." In fact, this is wrong and very dangerous, because the correct speed should be in accordance with the different sections, traffic flow speed.

If you do not dare to drive fast and do not tyrants with fast track driving, This will not only affect other people's traffic, can easily provoke a "scourge"; important thing is that, regardless of the speed speed, should as far as possible and keeping a at least one Car body About distance, it is very important concept of security.

Indian Passenger Vehicle Industry: ‘Small is beautiful’

Owning a car is aspired by every Indian household and with low penetration, increasing income levels and resumption of buoyancy in the economy, the opportunity in the passenger vehicle market is humungous. At present, around 30 out of every 1,000 households in India own a car. Even if the households that can afford owning a car are considered, the penetration is as low as 45 per cent. Having said this, of the households affording a car, around 70 per cent fall at the bottom of the income distribution pyramid and can afford owning a small car only. Furthermore, the excise duty on small car is lower at 8 per cent as against 20 per cent on big cars. This would translate into strong growth in the small car segment. The factors like households affording big cars but opting for small cars on account of their easier maneuverability given the traffic chaos and parking constraints in metros and poor infrastructure and congested agglomerations in smaller towns would help pushing the small car sales growth. Furthermore, rich households opting for small cars as their additional cars either for female or young members in the family or for smaller trips would also push small car sales. ( http://www.bharatbook.com/detail.asp?id=129357&rt=Indian-Passenger-Vehicle-Industry.html )

Nano is foreseen to give a supply-side push to the small car sales, as its first year cost of ownership, which typically determines the threshold income levels for buying the vehicle, is around 25 per cent lower than Maruti’s 800, the next cheapest available car. This has added 1 million households that can afford buying a car by 2013-14. The Original Equipment Manufacturers (OEMs) have taken into cognizance the humungous opportunity in small car sub-segment. Four out of the six launches till date in calendar 2009 fall in small car sub-segment, which includes Tata Nano, Maruti Ritz, Fiat Punto and Honda Jazz. Only Tata Manza and Chevrolet Cruze (General Motors) fall in mid-size sub-segment. Eight more launches are expected in the small car sub-segment in the next 15-18 months.

It developed a detailed statistical model that attempts to forecast the domestic passenger vehicle sales. The sales are segregated between personal use and commercial use on the basis of interaction with the industry and analytical acumen. Vehicle sales for commercial sales are forecasted on the basis of service sector GDP growth, while the vehicle sales for personal use are forecasted on the basis of ownership cost and the target household that can afford to own a car. Other qualitative factors like macro-economic outlook, consumer confidence, willingness of vehicle financers to finance purchases, actions of OEMs like launches, aggressiveness, sales push techniques, delaer network etc have also been quantitatively built in the demand forecasting model.

The report is divided into four sections. Section I presents viewpoint on the industry that covers domestic and export sales forecasts for the next five years and outlook on the profitability for next 15 – 18 months. Section II provides an in-depth study of the Indian passenger vehicle industry encompassing its evolution and the trends in the last five year. Section III provides profile of key players in the industry, while Section IV contains technical aspects and various key data tables as an Annexure to the report.
 

To know more and to buy a copy of your report feel free to visit : http://www.bharatbook.com/detail.asp?id=129357&rt=Indian-Passenger-Vehicle-Industry.html

Or

Contact us at :

Bharat Book Bureau
Tel: +91 22 27578668
Fax: +91 22 27579131
Email: info@bharatbook.com
Website: www.bharatbook.com
Blog: http://bharatbookresearch.blogspot.com
Follow us on twitter: http://twitter.com/3bbharatbook

Lead / Enquiry Management Module

» A form where the details of lead will be added and the details will be as follows.

» Name, Mobile, Tel, Email, new / old vehicle, vehicle model details, remarks, the sales person attending, the loan percentage, bank etc.

» After adding these details in the system a follow up could be set for the lead. Follow up could be done via sms/email or newsletters ie you can schedule sms and email whenever you want to for months together or more.

» A comprehensive report could be generated where details of all leads and the kind of follow up which is happening could be traced.

»You could know exactly how many leads are generated and know the number of leads a sales person is handling.

» You can now never miss a lead and can follow up with him even after 2,3,4 5 years and more.

Clients Testimonials

This is to certify that we have been satisfied by the customer friendly, quick & precise services of Dongre Technoquip Pvt. Ltd.
S.R. Siddiqui (CEO)

This is to state DQUIP (Dongre Technoquip Pvt Ltd) worked on the website of Save The Children India. We were happy with their work. They were amiable accommodating and sincere. What ever changes we needed were incorporated within the stipulated time. Sometimes they went beyond the brief and helped in projects which did not necessarily come within their preview for which we were very appreciative.
I wish then all the success in their future endeavors
Dr(Ms) Subhadra Anand
Save The Children India

We are happy with the services extended till date from the time of inception of our company. I think almost 4yrs have passed where you have been giving your services to us and we are happy with the same.
Thank you for the good services and prompt actions.
T.R Matthews
Celogen Pharma

This is to congratulate the team of Dongre Technoquip for their hard and dedicated work. They are a team of like minded, hard working and thorough professionals who make your web experience pretty smooth going. I have had the pleasure of being associated with them since the past 5 years and would'nt hesitate to say that the've done a great job. I would definitely recommend them to anyone looking for a web professional for a really hassel free experience.
Dr. Yazad Gandhi & Clinical Team
Dental & Maxillofacial Clinic
Mumbai
India

Cars, on behalf of a country's level of modernization in automotive technology, each brand's cars are the crystallization of high-tech. Since the 20th century, 80 years to achieve a strategic shift in China's automobile industry, China's car industry has been groping a road of development suited to national conditions.

In the new century, facing the accession to WTO, China's car industry will be what kind of situation arise? At present, China Society of Automotive Engineers, chairman of Societe Generale of Zhang's car market is currently conducted in-depth analysis.

"Three three small" pattern no longer exists

China's development of car industry to go through the introduction of advanced technology, joint ventures, the road, this is a shortcut. By taking this path, shortening the gap between the world car industry, has won progress of development.

January 15, 1984, China's first joint venture car - Beijing Jeep Corporation was established, producing the United States, Cherokee jeep; October 10 the same year, Sino-German joint venture Shanghai Volkswagen Automobile Co., Ltd. in Beijing, signed an agreement the two sides share capital of each 50%, production medium Santana, and now the size reached 30 million units.

July 22, 1985, Sino-French joint venture Guangzhou Peugeot Automobile Company in China registered Business Administration

. November 20, 1991, FAW-Volkswagen joint venture with FAW-Volkswagen Automotive Co., Ltd. 1, annual production capacity of 150,000 ordinary level of Jetta sedan base; the same year, December 19, two French Citroen Automobile Co Dongfeng Peugeot Citroen Automobile Company signed an agreement to establish plans to produce general-level type ZX Fukang sedans 150,000. This five foreign marriage coupled with the introduction of Japanese technology company wholly-owned enterprises in Tianjin Xiali, constitutes a "three major and three small" sedan layout.

10 years have passed, and now Guangzhou Peugeot has been reorganized as Guangzhou Honda, Production Accord. At the same time a number of new car companies and new products are emerging. FAW-Volkswagen Audi, ranging from an A6, Shanghai GM Buick kind of "Big Brother", it does have Chongqing Changan, Guizhou, skylark and other micro-cars that the two micro-enterprises, to the end of last year, 13 companies have been formally approved on the directory. This year also launched several new businesses to launch their quasi-car products such as: Zhejiang Geely, Chery, Anhui, Nanjing, Ingle and the excellent Nike, Jiangsu Yueda, Qingdao Yizhong so.

These new cars the emergence of enterprises and their products, not only broke the original "three three small, two micro" business arrangement, but also a richer product variety, and the high, medium, normal and low-grade sedan evil. At the same time, not only intermediate Santana, general-level Jetta, Beverly increase in a number of variants, the election loading, but there is also a Passat, Santana 2000 Buick, Red Flag, Audi, Guangzhou Accord and other high-end cars. 100,000 yuan less economic cars except Xiali, Alto, skylark addition, increased their improved and the antelope, Bethlehem, Big Dipper and so on. China's car production layout of such a change can be said that from the "Romance of Three Kingdoms" to a "relive" This is a good thing or a bad thing, is still unable to make conclusions.

Ordinary car market is fiercely competitive

    Ordinary car is defined to mean more than 1 liter displacement below 1.6 liters of cars in China is mainly from 1.3 to 1.6 liters of cars. According to statistics, the national production from 1.3 to 1.6 liters of cars 13 enterprises. From the original "Big Three" date, Jetta, Fukang cars of this grade, old Santana, although the 1.8-liter, mid-level models, the current price has been reduced to Jetta, Beverly, under ordinary sedans also joined the competition in ranks.

At present, China's largest production capacity of ordinary cars, most varieties, the market is fiercely competitive.

The first Jetta. While the older model Jetta, but after the transformation of FAW, the engine and gearbox are new and good results, the reliability is good, no big problems. In particular, with a five-valve engine Jetta, very competitive. FAW-Volkswagen to choose from a variety are more close to the scale of construction, last year produced more than 90,000 Jetta cars is expected to produce 120,000 this year will be more than happy to run this year, there will be a new car market.

Second, Beverly. Fukang cars more advanced, fuel-efficient, technically in the old model in a leading position, but the market relatively late, are gradually expanding their market share. Beverly vehicle production last year, 5.2 million units sold 54000.

This year is expected to be up to 8 million units, sales of the circumstances, mainly depends on the market. Fukang car engine has 1.4 liters, 1.6 to open two kinds, all EFI, the model species changed drastically. 988 body assembly using bi-fuel taxis, are very popular this year, there will be Picasso car into the market.

Third, Santana. Common type Santana has been reduced to 100,000 yuan a little more price competitive, last year produced more than 150,000 vehicles are still in the future will have a market. In addition to Poussin, the Shanghai Volkswagen Santana 2000 production was built, the Passat model the two plants, with a total production capacity of more than 300,000. In addition to the original engine produce 150,000 units of a 827 engine plant outside, and now built a scale of 270,000 units of the engine plant, producing 1.8 to open the engine, there are two valves and five valves, power, torque increase a.

Fourth, Sail and Xiali 2000o Sail is available on the development of China-based car new car prices, performance and competitive advantage. Xiali 2000 is Toyota's technological transformation of the new models, old Xiali generation product. The two cars will compete for Jetta and Fukang markets.

In the total amount of over-supply of high-end cars

China in the next five years, the development trend of high-end cars will be the total supply exceeds demand, some brands will no longer be as they are now and Xiao Qiao.

China's current high-end cars are mainly Santana 2000, Passat. Shanghai Buick, Audi, Hongqi, Guangzhou Honda. Shanghai Volkswagen's Passat is Volkswagen in Germany on the basis of the company's products, through the joint design and lengthen the body, is entirely a Chinese model, equipped with a 1.8-liter gasoline engine, but also optional diesel engine, low price paddy field in Guangzhou this year, is expected to produce 75000.

Audi A6 is the FAW Volkswagen joint development with the lengthening of the middle-grade sedan, production capacity of 30000, producing more than 15,000 vehicles last year, is currently in short supply. The localization rate of more than 40% car, body, engine manufacture their own engines with 1.8-liter five-valve gasoline engine, 1.8 liter turbo gasoline engine, as well as 24 liters, 26 liters imported engine. Manual gearbox for the self-control, automatic transmission for the imports, the lowest price (1.8 liters) 32.8 million, the highest in more than 40 million users, making it the highest-level sedan, this year may produce 250,000 , marketing and sales optimistic.

With the Red Flag sedan "Century Star", the product pull the grade, the market lacking a broad prospect, and last year's production of 15.3 thousand, this year may also be a little more. Red Flag sedan is primarily our own development, China-owned enterprises, production management is good, quality is guaranteed. Domestic motor vehicle equipment 488 cheaper, imported equipment more expensive engine.

Shanghai GM Buick sedan is spent a lot of money, technology, advanced equipment, Ye Hao. Began to market in short supply, last year produced 30000, the market is not tight, and this year will launch a kind of bullet-truck.

    Guangzhou Honda five years of production by 3.2 million units in short supply this year, may reach 50000, and markets are easing. In the high-end cars available capacity will exceed market demand, competition will become intense.

In addition, this year there will be DPCA Picasso, FAW Volkswagen will have to run a fun car on the market. The two general-Class on the 1.6-liter engine has 2.0 liters and above million liters of displacement, is intended to move closer to mid-size car, is a quasi-mid-size car, advanced technology, prospects are bright. Will also compete for high-class cars market.

Beijing Jeep Cherokee sport utility vehicle produced by the mountain belongs to cars. However, gas-guzzling large, in urban areas can not play four-wheel drive advantage, not suitable for the Chinese market, has never been the ability to reach 30000. Recently, the joint venture the two sides have decided to raise capital, to extend the joint venture period, producing a larger displacement of the Grand Cherokee, grades high, sales would have been better, but the volume will not be great.

Mini buses, cars will continue to grow economy

Mini bus, economy cars is less than 1 liter displacement of small buses and micro-cars, including the National 9 production of micro-cars and small vans. In the economy car, Tianjin Development Corporation to introduce Japanese technology

Production of 1 liter of displacement of the Xiali, a few years ago has reached an annual output of 100,000, made money doing a taxi. But in recent years due to technological level, assembly level and other reasons, market share shrinking to be a replacement.

Changan Auto Production 47000 last year, output growth in every year though, but the market growth is not. Changan Suzuki Alto and Japanese joint venture to produce cars of antelope, has entered the taxi market in Chongqing, the new taxis are mostly antelope, squeezed Xiali, Beverly, also squeezed Alto, Qinchuan car and made a new product, ALTO longer than 200mm, can hold 1 liter or 0.8 to open engine, ride comfort, molds are doing a good job, and 40000 the size of this year will be put into production competitive. Guizhou Skylark production of very small.

The first mini-van Tianjin Beverly. At that time, Tianjin mini passenger and goods vehicles in first place, is the first mini-car. Later, Chongqing Changan, Jiangxi Changhe, Harbin Hafei, Liuzhou Wuling mini-bus up, etc., and the price is right, sales are good. Now, passengers are carrying out these types of micro-modification and updating. If Changan Star, the Songhua River and Italy, Changhe Big Dipper and so on.

Optimistic about the future trend of mini-car. Production of micro-off last year, more than 40 million vehicles this year will be around 50% of the rate of growth, will reach more than 60 million vehicles next year, up to 80 if 900,000, more than car production. End of this year, micro-cars will form a 1 million capacity in 2005 will reach 180 in case capacity of 2 million. Analysis of the rate of sustained growth of micro-causes; First mini-car cheaper, the lowest less than 3 million, you can sit five people, for the purchasing power of urban residents in China, relatively few paid all taxes, fuel-efficient, economic good; second is to speed up highway construction, the township has a paved road a micro-car will replace the part of the agricultural vehicles to enter the small towns.

The face of an oversupply of capacity and number of brands, WTO after China's car market situation is not optimistic, at least to 2005 years ago, to be chaotic for some time. The result of competition is the survival of the fittest, of course, the focus of competition is the product market position. While improving product competitiveness ways: First, increase the technology content, improve quality; the second is to reduce the cost; 3 is good service.

» Once the lead confirms to buy a new or second hand car he could be automatically added in the client list and would be deleted from the lead list or one could also add a client directly.

Features the client form and module would contain the following:-

» The car model.
» The accessories he wants so that the accessories section could fit them.
» The work to be done at workshop ie anti rust etc so that the work shop could process the same and bills could be generated.
» The name of sales person who is handling the client.
» The details of service reminders get automatically set as per the deadline of dates or could be sent manually so that no one has to personally call the customer.
» Bills for accessories and work in work shop could be raised at one go or by the respective section this could be flexible.
» After the car is ordered the status of car could be messaged to the customer.
» Automated insurance, RTO and other reminders could be set for the client and the management or concerned person to follow up.
» The work shop can see all the clients and can raise bills for respective clients . This would help you trace business from one client. Also help you the have centralised billing for analysis.
» The customer can see the accessories with photos and can order the same while sitting with the sales person. Billing for the same could be done by the sales person or the person handling the accessories section.
» All clients could be wished happy birthday, anniversary, diwali, new year etc greetings automatically via sms and email. This would create good will and increase recall also details of family could be added and messages could be sent to them too.
» Can send mass SMS to all clients and leads for promotion.
» Can send specific sms ie if there is a exchange offer of maruti wagon r then only wagon r owners could be selected and sent an sms.
» Service and maintenance could be set for all car owners.
» Comprehensive reports on payments.
» A follow up could also be set for payments.

Last year Olympics After the end, as our Beer Industry Olympic sponsors, Yanjing Beer Wine Group Games Marketing Follow-up has yielded good results in the May 23 meeting of the eighteenth Yanjing Beer Festival news conference, Yanjing Beer Group chairman Li Fucheng briefing to journalists attending the first quarter Sell Situation.

The first quarter, the national beer production and sales volume grew 5.3%, Yanjing Beer Company's sales growth was 13.5%, net profit rose 16.29%. This year in January? April, Yanjing beer sold in the country 126.3 million liters.

By Financial Crisis, the growth rate the beer industry there have been slower, but the competition Yanjing has maintained a good momentum of growth.

Li Fucheng the analysis of the negative impact of financial crisis, the reasons for under achievement in that the main national economic growth, ensuring the people's livelihood, maintaining stability and confidence in a firm, the State introduced to spur economic growth 4 trillion economic stimulus package, and a series of policy adjustments, these are good news for beer industry. In addition, 17 Third Plenary Session of 2020 set targets to double the income of peasants, farmers increase income for the beer market has opened up new room for growth.

In addition, to maintain high growth Yanjing beer production and sales have the confidence. Last year, Yanjing full use of the Olympic sponsorship opportunities, to build and strengthen the Yanjing brand, increase the centripetal force of the enterprise, enhance the corporate brand, provide a basis for increased sales. To ensure the company quickly made from: China Wine News Show, Yanjing has engaged the State Council Development Research Center, Peking University, Tsinghua University and other relevant units of the enterprise experts to explain the macroeconomic situation, provide recommendations for enterprise development, and identified strategic adjustment program. Specific programs: adjustment of product structure. The high-end liquor to adjust the proportion of last year end liquor from 22% to 33%; on brand restructuring. 1 +3 structure of the implementation of the brand to Yanjing main brand, while fostering Li River spring, Huiquan, snow deer three regional advantages brands; market restructuring, Yanjing five advantages in cultivating a regional basis, strengthening the technology innovation efforts to make Guangdong, Hunan and Shandong provinces substantial growth in production and sales. By the Guangdong, Guangxi, Hunan provinces run-managed, market channels and further stability.

Although the financial crisis, but a good Yenching growth this year in January? April, Yanjing Beer in the country sold 126.3 million liters, according to the present rate of growth will surpass this year's marketing plan.

Regional markets, Yanjing also showed good growth momentum, Guangdong Yanjing Beer in 2008, an increase of 12 million liters, based on this in January? In April to achieve sales of 8.1 million liters, in Guangzhou the same 9.85% decline in industry production and sales situation, an increase of 71.2%. Hunan Hengyang co-operation with Xiangxiang, out of no sales of beer products, the first 4 months of the company sales increased by 32.1% in Hengyang, Hunan Yanjing company's sales has increased 68.9%.

<<

  China's automobile production and sales of market growth, so that the global auto parts manufacturing industry whom attention. Being at the "Shanghai International Auto Parts & Accessories Show" and the "Shanghai International Automobile Manufacturing Equipment Exhibition", the international interbank market, interest in China will undoubtedly reveal.

3-day exhibition, from the United States, Canada, France, Germany, Japan, Korea and other 15 countries and regions, more than 200 enterprises have displayed their new technologies, products and equipment, including auto parts, auto accessories , automobile and parts manufacturing, tires and wheels, electronics and electrical equipment, molds, welding and cutting instruments.

3M, Exxon Mobil, Bayer, Dai high, Atotech, ICP, Wacker Chemie, Philips, Dow Corning, the United States Weikai company, Fuli Greek, and other famous enterprises have appeared, for the latest technology and products, look for Chinese buyers.

In addition, Pusan, Korea International Trade Association, Singapore Industrial Automation Association also organized a huge exhibition group, appeared in the show.

Singapore Industrial Automation Association, Chen Yuan-feng said that the exhibition for auto parts manufacturing related businesses in Singapore to support China's auto industry provides a good opportunity. He believed that Singapore companies will be at the show to find a large number of business opportunities with their Chinese counterparts to form a broad collaborative relationship.

The exhibition organized by Adsale Exhibition Services Ltd Stanley Chu, chairman, said in 2006 China's automobile production and sales both more than 7.2 million first half of 2007 production and sales both more than 4.3 million are expected in the next few years, been able to maintain sustained growth.

"The scale production and sales, while the industry auto parts and equipment to improve production efficiency, quality and effectiveness of even more concern." Stanley Chu said that the show just to build a domestic and foreign products and technology exchange in international platform for both to meet the needs of buyers, is also China's automobile industry for the global market, enhance international competitiveness, provide a good reference value.

In all "health" of the era, food brought to people "other effects" beyond its original physiological function. Such as access to psychological satisfaction through food, or food to the body through the great "pleasure?" Is what we usually say to eat tonic. Of course not to say that illness can be cured by eating so we just adapt to season the water, the body and nature to achieve synchronization.

Tasting time : Health food spring season Wine Fresh start

Warmth of spring and we look forward to in the not so is coming to, but for many people, Jingzhe strong after the "vitality" has appeared in often came out of acne on, and everything is more to food recovery "of flat "things, to fresh Spring Festival, we vegetarian and lighter body.

Lage De Peng Vineyard Winery spot dry white Pinot Grigio Wine 2007 Origin: Italy, Atuoadi statutory

Asparagus Mushroom heavy and mellow Pinot Gris

Features Yellow rice wine crystal clear. The sweet, slightly smoky flavor, grape varieties unique aroma and elegant fragrance mixed oak integration. Mouth full, pure and soft, with creamy texture, aftertaste heavy and mellow, sustained, full of spices. Appropriate conditions can be 3 to 5 years cellaring. Recommended reason

Asparagus Mushroom is a vegetarian, Mushroom sauce taste and it tastes very "dirty" flavor. Mushroom Fried will even slightly smoky flavor. Although the Qing Caowei asparagus dish tastes like a spring to the outskirts, but with a creamy texture Lage De Peng vineyard wine garden spot of dry white Pinot Grigio Wine 2007 was from the mouth taste, and is still strong in the dishes in such a phase match Tricholoma.

Pu Yifu U.S. 2006 Origin: France Loire Valley

Ginkgo sense of Pu Yifu lily with the U.S. Minerals

Features Features: Pouilly region of vineyards, the earliest records dating back to 5th century AD, this wine has a rich and complex scent, full of minerals and roasted Bread Odor. This is a very clean dry white wine, wine balance, after the flavor. Recommended reason

Recommended reason: ginkgo, and Lily were eating a "fresh and kept on" vegetarian materials, these two ingredients has a little "medicinal," but also dip bitter taste with aroma of a class of minerals Pu Yifu most appropriate to the United States. Between them is almost non-interference with each other they can all glory, though taking a different large ones, but such a prominent personality, two completely different texture and taste are so coordination can occur at the same time, this is the most fantastic try.

Soil Qi collection Chardonnay 2006 Location: Chile Crispy tofu Toon

New World chardonnay oak aging Features After 6 months the United States Rubber Barrel Aging, the color yellow, wine with the aroma of tropical fruit and oak. Recommended reason

Tofu and cedar, and this match is very unusual in China, tofu and chardonnay in the beans taste of yeast flavor (taste a bit like baking bread) are assigned, Toon taste quite channeling, tropical fruit wine is to taste it but exist.

By the China Machinery Industry Federation, China Automotive Industry Association's "2009 China Machinery Industry hundred enterprises, Fortune 30 Automotive Information Conference & Machinery Industry Development Seminar" was held recently in Beijing.
CPPCC National Committee member Wang Ruixiang, president of China Machinery Industry Federation, China Machinery Industry Federation executive vice president of Chi Wei Cai, China Association of Automobile Manufacturers, Vice President and Secretary General Dong Yang, deputy director of Machinery Industry Information Center, China Machine by Network General Manager Shen Bo attended the meeting. Won the 2009 hundred Chinese machinery industry, automobile industry's top 30 powerful business leaders, and the China Machine Tool Industry Association and other related associations and national major media, led nearly 200 people attended the meeting.
China Machinery Industry hundred enterprises, automobile 30 strong enterprises contest, from 2005 to now been held for five years straight, this is the China Machinery Industry Federation and China Association of Automobile Manufacturers and organizations co-sponsored public service sectors activities to promote bigger and stronger machinery industry to speed up the pace. The activities for enhancing the community's concern and support machinery industry, to enhance the visibility of the industry advantage and competitiveness of enterprises, encourage enterprises to become bigger and stronger, with a positive role in promoting and promoting.
Company main business income of the year for the Chinese Machinery Industry Automotive 30 hundred strong enterprises and enterprises the main basis for selection, and sorting. Group re-elected to the 2009 annual "China Machinery Industry hundred enterprises."
In 2009, "the China Machinery Industry hundred", a total of five companies selected machines. As a representative, deputy general manager, chief accountant Zhao Ji made a "vigorously develop modern manufacturing services for companies and Make" the keynote speech, introduced the two in recent years, economic development and other aspects of technological innovation, by participating leadership and expert attention.

Airbags, has been Car Companies "crying," the selling point. Cars driven to the unrecognizable, but may not be able to open the bag, then "the impact angle is not right" or "impact force is not enough" became the vehicle manufacturers, "excuse." Anhui Consumers Association pointed out that such disputes arise, the interests of consumers are not adequately protected the fundamental reason is the lack of national standard airbags.

Anhui Provincial Consumers Association called for an international standard airbags (HC Auto Accessories Network with map)

Status: two recall 1000 "in car"

Earlier this year, the provincial capital of Anhui Province Chaohu Road, traffic accident occurred, the right front of Ms Lau car collided with a large truck, car severely deformed, but Automotive Safety A balloon was not open, resulting in serious injury after Ms Lau died. Later, Ms Lau family car maker to court. But car manufacturers believe that their car before leaving the factory, there are stringent security checks, all qualified products, air bags not open the case impossible, "certainly was not the location of impact."

Province CASE relevant personnel, in similar cases, the car maker to hit the wrong angle, position or intensity not allowed refused to recognize the car has quality problems, but in fact, in recent years about the car quality complaints are rising rapidly. Reporters from the provincial CASE learned of complaints about cars with gradual upward trend, the year in our province last year received 143 complaints from the car, of which 106 complaints from quality problems, accounting for 74% of the total complaints, the more quality increasingly become the troubled automotive consumer problems.

's Defective products from the State Administration of Quality Supervision Management Center issued a notice that the vehicles for the last two years due to defective airbags and active recall as many as over 1,000 vehicles involved in a number of well-known car manufacturers and number of car brands.

Businesses: air bag to open certain conditions need to

Face Automotive Safety Airbag situation can not be opened, consumers and businesses are always uncompromising, consumers felt the car quality problem, businesses that do not meet airbag detonate conditions. DCH Auto

Sell Co., Ltd. Technology Jiajing Li said that since the performance of different vehicles, airbag detonation conditions are not as general, mid-range cars need to be detonated positive impact airbags, and even hit the side of luxury cars can be. At the same time, no matter what car, detonating airbag requires some efforts, but the car is no different, in the end require much effort is difficult to generalize. In theory, only the vehicle in front of about 60 degrees around a fixed object collision location, the speed higher than 30km / h, then it may open the airbag. Mentioned here are not the usual sense of the speed of the speed, but in the laboratory relatively rigid fixed obstacles in vehicle collision speed, the actual collision test car faster than the speed bag to open.

Provincial Consumers Association: call for a national standard airbags

"Whenever such incidents occurred, the reason many manufacturers are: the angle of impact does not, not allowed or are not sufficiently strong position." Such an interpretation to some extent now has become a kind of auto consumption potential rules, but this interpretation is often questioned by consumers. Provincial Consumers Association, said the officials, the key is to evaluate whether the defective airbag national standard has been missing "

It is understood that the State only in April 2006 introduced three parts involving airbags recommended national standard, it only provides for a separate parts of the test methods, are parts in the assembly before the test standards, rather than the entire airbag integrated system evaluation criteria, it can not be determined by the manufacturing quality of the qualified balloon, balloon and matches the specific model is the basis, not to judge after the accident as airbags should open basis.

As lack of standards, resulting in the appearance of the following three conditions, one can not define the quality of automotive airbags and matching process is qualified, and second, consumers and car manufacturers so there is a dispute, due to lack of standards, leading to CASE mediation organizations can not follow, so that a complaint handling such disputes in a difficulty. Third, even if consumers to sue for mediation to the court, often because of the lack of standard products can not determine whether there are quality defects, so that consumers can not be effectively protected the legitimate rights and interests.

Thus, Sichuan and other provinces CASE 6 (CC) joint letter to the Ministry of Industry, the State Administration of Quality Supervision, National Standards Commission to submit a "safety air bag on the car as soon as possible the recommendations of the national standard letter", called to formulate and publish as soon as the national standard airbag. But Jiajing Li said there were national standard is a good thing, but after the accident and so delineated responsibilities, or a difficult task, because the leading airbag quality deficiency are many reasons, some air bag manufacturers, production quality problems, some assembly problems, while others are sensing system software problems.

Table of Contents : 
1. Introduction
2. China Retail Market Size & Forecast
3. China Retail IT Market Size & Forecast
4. China Retail IT Market Segmentation by Technologies
4.1 Top Five Software Technologies in China Retail IT Market
4.2 Top Five Hardware Technologies in China Retail IT Market
4.3 Top Five Services in Chinese Retail IT Market
5. Chinese Retail IT Market Trends
6. China Retail IT Market Growth Drivers
7. Chinese Retail IT Market Challenges
8. China Retail IT Market Vendors
8.1 Cisco
8.2 Dell Inc.
8.3 eFuture Information Technology Inc
8.4 Founder Technology Group
8.5 Hewlett Packard (HP)
8.6 IBM
8.7 Kingdee International Software Group
8.8 Lenovo
8.9 Microsoft
8.10 Oracle
8.11 SAP
8.12 UFIDA Software Co. Ltd
9. China's Leading Retail Companies
9.1 Top 25 Retailers in China
9.2 Top 10 Foreign Retailers in China
10. China IT Policy Making Agencies
Other Reports in this Series

List of Exhibits
Exhibit 2.1: China Retail Market Size and Forecast 2008-2012 (In $ million)
Exhibit 3.1: China Retail IT Market Size and Forecast 2008-2012 (In $ million)
Exhibit 4.1: China Retail IT Market Segmentation - 2008
Exhibit 4.2: Top Five Software Technologies in China Retail IT Market (2008)
Exhibit 4.3: Top Five Hardware Technologies in China Retail IT Market (2008)
Exhibit 4.4: Top Five Service categories in China Retail IT Market (2008)

5. Chinese Retail IT Market Trends
6. China Retail IT Market Growth Drivers
7. Chinese Retail IT Market Challenges
8. China Retail IT Market Vendors
8.1 Cisco
8.2 Dell Inc.
8.3 eFuture Information Technology Inc
8.4 Founder Technology Group
8.5 Hewlett Packard (HP)
8.6 IBM
8.7 Kingdee International Software Group
8.8 Lenovo
8.9 Microsoft
8.10 Oracle
8.11 SAP
8.12 UFIDA Software Co. Ltd
9. China's Leading Retail Companies
9.1 Top 25 Retailers in China
9.2 Top 10 Foreign Retailers in China
10. China IT Policy Making Agencies
Other Reports in this Series

Aarkstore Enterprise specialize in providing online market business information on market research reports, books, magazines, conference booking at competitive prices, and strive to provide excellent and innovative service to our customers.

http://www.aarkstore.com/reports/IT-Market-in-Retail-Industry-in-China-2008-2012-37669.html

Aarkstore Enterprise
Tel : +912227453309
Mobile No: +919272852585
Email : contact@aarkstore.com
Website : http://www.aarkstore.com
Blog: http://blogs.aarkstore.com/
Follow us on twitter: http://twitter.com/aarkstoredotcom

Table of Contents : 
1. Introduction
2. China Telecom Market Size & Forecast
3. China Telecom IT Market Size & Forecast
4. China Telecom IT Market Segmentation by Technologies
4.1 Top Five Software Technologies in China Telecom IT Market
4.2 Top Five Hardware Technologies in China Telecom IT Market
4.3 Top Five Services in China Telecom IT Market
5. China Telecom IT Market Trends
6. China Telecom IT Market Growth Drivers
7. China Telecom IT Market Challenges
8. China Telecom IT Market Vendors
8.1 Cisco
8.2 Dell Inc.
8.3 Founder Technology Group
8.4 Hewlett Packard (HP)
8.5 IBM
8.6 Kingdee International Software Group
8.7 Lenovo
8.8 Microsoft
8.9 Oracle
8.10 SAP
8.11 UFIDA Software Co. Ltd
9. China Leading Telecom Companies
9.1 Top Telecom Companies in China
10. China IT Policy Making Agencies
Other Reports in this Series

List of Exhibits
Exhibit 2.1: China Telecom Market Size and Forecast 2008-2012 (In $ million)
Exhibit 3.1: China Telecom IT Market Size and Forecast 2008-2012 (In $ million)
Exhibit 4.1: China Telecom IT Segmentation - 2008
Exhibit 4.2: Top Five Software Technologies in China Telecom IT Market (2008)
Exhibit 4.3: Top Five Hardware Technologies in China Telecom IT Market (2008)
Exhibit 4.4: Top Five Service Categories in China Telecom IT Market (2008)

Aarkstore Enterprise specialize in providing online market business information on market research reports, books, magazines, conference booking at competitive prices, and strive to provide excellent and innovative service to our customers.

List of Exhibits
Exhibit 2.1: China Telecom Market Size and Forecast 2008-2012 (In $ million)
Exhibit 3.1: China Telecom IT Market Size and Forecast 2008-2012 (In $ million)
Exhibit 4.1: China Telecom IT Segmentation - 2008
Exhibit 4.2: Top Five Software Technologies in China Telecom IT Market (2008)
Exhibit 4.3: Top Five Hardware Technologies in China Telecom IT Market (2008)
Exhibit 4.4: Top Five Service Categories in China Telecom IT Market (2008)

http://www.aarkstore.com/reports/IT-Market-in-Telecom-Industry-in-China-2008-2012-37671.html

Aarkstore Enterprise
Tel : +912227453309
Mobile No: +919272852585
Email : contact@aarkstore.com
Website : http://www.aarkstore.com
Blog: http://blogs.aarkstore.com/
Follow us on twitter: http://twitter.com/aarkstoredotcom